热搜词:冷凝器  冷凝器厂家  列管式冷凝器  不锈钢冷凝器  半盘管反应釜  搪瓷设备  储罐  

当前位置:
开心飞鹰 > 技术知识

解析不锈钢冷凝器如何进行日常维护技巧

人气:36 评论:0 日期:2019-01-03 08:31:10

不锈钢冷凝器具有优良的机械性能,可承受较高的工作压力,也可承受块状固体物料加料时的冲击;耐热性能好,工作温度范围广,具有很好的耐腐蚀性,传热效果好,升降温速度快。 按反应温度的高低分为高温树脂冷凝器(150℃-300℃)和低温树脂冷凝器(60℃-150℃),醇酸树脂冷凝器属高温树脂冷凝器,氨基酸树脂冷凝器、丙烯酸树脂冷凝器和乳液冷凝器属低温树脂冷凝器。

Stainless steel condenser has excellent mechanical properties, can withstand high working pressure, can also withstand the impact of bulk solid material feeding; good heat resistance, wide working temperature range, good corrosion resistance, good heat transfer effect, fast temperature rise and fall. According to the reaction temperature, it is divided into high temperature resin condenser (150 -300 C) and low temperature resin condenser (60 C -150 C). The alkyd resin condenser is a high temperature resin condenser, amino acid resin condenser, acrylic resin condenser and emulsion condenser are low temperature resin condensers. 不锈钢冷凝器广泛应用于石油、化工、橡胶、染料、医药、食品,用来完成硫化、硝化、氢化、烃化、聚合、缩合等工艺过程。

Stainless steel condenser is widely used in petroleum, chemical industry, rubber, dyestuff, medicine and food. It is used to complete sulfurization, nitration, hydrogenation, alkylation, polymerization, condensation and other process.

不锈钢冷凝器具有这么多的优点,被应用于多种行业中。那么不锈钢冷凝器要怎样进行维护呢?

Stainless steel condenser has so many advantages that it has been used in many industries. So how to maintain the stainless steel condenser?

1、首先要经常注意整台设备和减速器的工作情况;

1. First of all, we should pay attention to the working condition of the whole equipment and the reducer.

2、电加热介质油每半年要进行更换;

2. Electric heating medium oil should be replaced every six months.

3、减速器润滑油不足应立即补充;

3. Insufficient lubricating oil of reducer should be replenished immediately.

4、对夹套和锅盖上等部位的安全阀、压力表、温度表、蒸馏孔、电热棒、电器仪表等要应定期检查:如果有故障要即时调换或修理。

4. The safety valve, pressure gauge, thermometer, distillation hole, electric heating rod and electrical instrument at the upper parts of jacket and pot cover should be inspected regularly. If there are any faults, they should be replaced or repaired immediately.

5、设备不用时,一定用温水在容器内外壁清洗,经常擦洗锅体,保持外表清洁和内胆光亮,达到耐用的目的。

5. When the equipment is not in use, it must be washed with warm water on the inside and outside of the container, and the pot body is often scrubbed to keep the appearance clean and the inner liner bright, so as to achieve the purpose of durability.

使用不锈钢冷凝器需要注意的事项如下:

The matters needing attention in using stainless steel condenser are as follows:

1、在使用前必须要关闭冷媒进管阀门;

1. The refrigerant inlet valve must be closed before use.

2、开动搅拌器,再输入物料,然后开启蒸汽阀门和电热电源;

2. Turn on the agitator, then input the material, and then open the steam valve and the electric and thermal power supply.

3、到达所需温度后,应先关闭蒸汽阀门和电热电源,过2~3分钟后,再关搅拌器;

3. After reaching the required temperature, the steam valve and the electric and thermal power should be closed first, and then the agitator should be closed after 2-3 minutes.

4、加工结束后,放尽锅内和夹套剩余冷凝水后,应尽快用温水冲洗,然后用40~500C碱水在容器内壁清洗,以达到耐用的目的。特别锅内无物料(吸热介质)空锅情况下,不得开启蒸汽阀门和电热电源,5特别注意使用蒸汽压力,不得超过定额工作压力。

4. After processing, after discharging the remaining condensate in the pot and jacket, rinse with warm water as soon as possible, and then clean the inner wall of the container with 40-500C alkali water to achieve durability. When there is no material (heat absorbing medium) in the special pot, the steam valve and electric power supply shall not be opened. 5. Special attention shall be paid to the use of steam pressure, which shall not exceed the quota working pressure.

辛苦整理!转载请注明来自 http://olseven.com/n1b/3044.html

相关文章

  • 厂家推荐的冷凝器清理的步骤和方法
  • 为什么列管冷凝器会出现动力不够的情况
  • 不锈钢冷凝器的功能检测及工艺过程
  • 厂家分析列管冷凝器容易泄露的原因是什么?
  • 影响列管式冷凝器运行效果的因素
  • 列管式冷凝器常用的加热剂和冷却剂主要是什么
  • 厂家揭示实验室冷凝器购买时注意事项
  • 冷凝器内部压力增高分析结果
  • 不锈钢冷凝器制造过程壳体的圆度和直线度
  • 冷凝器内外部保护措施的执行



  • 冷凝器的密封选择有哪些好处?

    在搅拌与冷凝器结合处的密封的选择对于密封效果、使用安全、节约成本等都显得特别重要。首先要明确密封选择的依据:一是釜内的工作压力,二是工作物料的性质。还有一个就是设备的工作温度。其次要明确冷凝器所用密封的类别,冷凝器所用密封即通常所说的轴封有两类:一是填料密封,二是机械密封,机械密封又分为单机封(即单端面机械密封)和双机封(即双端面机械密封),单机封全套还包括…


    厂家揭示冷凝器的主要作用及操作要求

    冷凝器的主要作用就是实现原料聚等过程,能满足原料生产过程,达到理想的生产。不过需要注意的是要规范操作,如果在使用冷凝器的时候,操作步骤错误就会造成损坏,影响生产。操作前检查:操作化工冷凝器之前要检查,检查设备是否有异状。如果设备在正常运行中,一定不能将上盖和触及板打开,以免发生触电现象。在操作的时候严禁带压操作,这样不仅损坏设备,同时有安全危险。在氮气试…


    解读冷凝器设备的防腐措施有哪些

    冷凝器设备是我们经常见到的装有液体或者气体的装置,对于承装液体的冷凝器设备我们还要做好防腐工作,下面是几种防腐方法。1、金属防腐层。我们可以采用耐介质腐蚀的金属,经过喷镀、电镀与被保护的冷凝器设备壁表面金属牢固结合在一起,这样就形成金属保护层,使其在一定的机械压力或者热力压力下都不会脱落或剥离。我们在覆盖保护层之前要将喷砂、钢丝刷用砂纸打磨,必要时我们可酸…


    厂家对冷凝器的控温如何做到最好

    冷凝器一般都有搅拌器,保证冷凝器内温度均匀。冷凝器温度控制分升温和降温两种(视内部是放热反应还是吸热),升温采用蒸汽、熔盐或者其他加热介质,降温一般是冷却水或者其他介质,不论加热或者降温都是采取加热或者冷却介质流量控制,手动开关阀门,或者用自动控制采用温度显示信号通过控制器控制加热、冷却介质的调节阀调节流量来控制。自控冷凝器的控制法则如下:condensersgene…


    厂家揭示中试冷凝器的特点和使用事项

    中试冷凝器主要特点:中试冷凝器主要用于生产固化剂,具有操作方便,混合效果好,控温精确等特点。一般由冷凝器、升气管、立式冷凝器等组成。中试冷凝器采用优质不锈钢制作,采用上下封头结构,可抽真空,配有机械密封或填料密封,搅拌桨可定制各式桨叶,中试冷凝器内锅和夹套配套数码式温控系统,可以自由设定所需温度的上限和下限,随时监测温度变化,提高生产的效率和安全性。main…

技术知识

联系中骐石化

0510-85390527